Lansinoh Compact Single Electric Breast Pump

Product Introduction:

Experience the power and convenience of the Lansinoh Compact Single Electric Breast Pump. Its small, lightweight design with micro USB power adapter makes it perfect for use at home or on the go. The two-phase technology maximizes milk flow, while the adjustable suction and rhythm levels mimic the way your baby naturally feeds. The exclusive ComfortFit Flanges provide a comfortable pumping experience, and the hygienic closed system helps prevent milk backup for easy cleanup. BPA and BPS free for all parts that come in contact with breastmilk.

Features:

• Two-phase technology: stimulation mode initiates milk flow and expression mode maximizes milk flow
• Adjustable suction and rhythm levels mimic the way your baby naturally feeds
• Exclusive ComfortFit Flanges provide a comfortable pumping experience
• Hygienic closed system helps prevent milk backup for easy cleanup
• BPA and BPS free for all parts that come in contact with breastmilk

Instructions:

1. Ensure that the breast pump has been properly cleaned. Wash your hands thoroughly and make sure your breasts are clean.
2. Ensure the breast pump and the Breastmilk Expression Set have been correctly assembled and the silicone tube is securely attached to the pump via the tubing connector and to the diaphragm cap.
3. Hold the Breastmilk Expression Set to your breast with the center of your nipple extending towards the tunnel of the ComfortFit breast flange.
4. Make sure the breast completely fills the ComfortFit breast flange so that a vacuum is formed and no air escapes.
5. The Breastmilk Expression Set and nipple tunnel must tilt slightly downward to allow milk to flow naturally toward the bottle.
6. Press and hold the ON/Off button for a few seconds to turn the pump on.
7. The breast pump will always start in Let-Down Phase Level 3 and will automatically switch to Expression Phase after 2 minutes. If your milk starts flowing before the 2-minute transition, you can switch to Expression Phase at any point by pressing the button. You can always return to the Let-Down Phase when needed by pressing the button again.
8. You can increase the suction level by pressing the + button. You can decrease the suction level by pressing the – button. A maximum of 5 LED lights will illuminate depending on the selected suction level.
9. Note: If the suction becomes uncomfortable, reduce it by pressing the – button.
10. When a pumping session is finished, turn the pump off with the On/Off Button. Ensure there is no suction on the nipple before removing the ComfortFit breast flange from the breast. If necessary, break the suction by inserting a finger between the breast flange and the breast. Once the suction is broken, the ComfortFit breast flange can be removed safely.
11. Carefully remove the bottle from the breast flange body and close the bottle with the sealing cap provided. Please follow the breastmilk storage guidelines as outlined in Section 3.
12. Note: If the pump unit is left on and unattended for more than 60 minutes, it will automatically power off.

Ingredients:

BPA and BPS free plastic